High-resolution data collection for research applications
Overview
Logging mode delivers high-resolution data recording directly on your device, capturing measurements at a 1 Hz frequency for advanced research applications. Unlike measuring mode, logging mode is managed through Calera® software.
Key Features
High-resolution data capture at 1 Hz sampling rate
Simultaneous management of multiple devices
Reliable direct control via Bluetooth dongle for PC/Mac
Accelerated data downloads with dedicated software
Optimized for research workflows and professional environments
⚠️ Haven’t downloaded the software or created an account yet? Get started here
Setting Up the Measurement
Ensure the BLE dongle is connected to your PC and the devices are fully charged.
Launch the Research Tool software. (Picture 1)
Shake the devices until the green light flashes.
Scan for available devices and select your preferred device.
Verify the device is running the latest firmware and the correct algorithm.
Switch the device to "logging" mode (Picture 2)
Selecting your device
Select "logging"
Click on "Set State"
Scan and verify the updated state
Attach the device to the subject
Allow 20 minutes for calibration to ensure accurate measurements.
After the measurement, switch the device to "Download Ready". (Picture 3)
Selecting your device
Select "Download Ready"
Click on "Set State"
Scan and verify the updated state
Navigate to the "Download" tab to retrieve the data. (Picture 4)
Once the download completes, the device will automatically revert to measuring mode.
⚠️ Important:
Make sure the devices are set to the desired State before recording and downloading the data.
Measurements are logged at 1 second intervals and accelerometer data is included.
